Exploring the stemflow dynamics and driving factors at both inter- and intra-event scales in a typical subtropical deciduous forest

Numerous efforts have been made to understand stemflow dynamics under different types of vegetation at the inter-event scale, but few studies have explored the stemflow characteristics and corresponding influencing factors at the intra-event scale. An in-depth investigation of the inter- and intra-event dynamics of stemflow is important for understanding the ecohydrological processes in forest ecosystems. In this study, stemflow volume (F_V), stemflow funnelling ratio (F_R), and stemflow ratio (F_%) from Quercus acutissima and Broussonetia papyrifera trees were measured at both inter- and intra-event scales in a subtropical deciduous forest, and the driving factors, including tree species and meteorological factors were further explored. Specifically, the F_V, F_R and F_% of Q. acutissima (52.3 L, 47.2, 9.6%) were lower than those of B. papyrifera (85.1 L, 91.2, 12.4%). The effect of tree species on F_V and F_% was more obvious under low intensity rainfall types. At the inter-event scale, F_V had a strong positive linear correlation with rainfall amount (G_P) and event duration (D_E) for both tree species, whereas F_R and F_% had a positive logarithmic correlation with G_P and D_E only under high-intensity, short-duration rainfall type. F_R and F_% were mainly affected by wind speed and the maximum 30-min rainfall intensity under low-intensity, long-duration rainfall type. At the intra-event scale, for both tree species, the mean lag time between the start of rainfall and stemflow was the shortest under high-intensity, short-duration rainfall type, while the mean duration and amount of stemflow after rain cessation were the greatest under high-amount, long-duration rainfall type. The relationship between stemflow intensity and rainfall intensity at the 5-min interval scale also depended greatly on rainfall type. These findings can help clarify stemflow dynamics and driving factors at both inter- and intra-event scales, and also provide abundant data and parameters for ecohydrological simulations in subtropical forests.     

筋土界面特性宏细观分析试验仪器研制与应用

为了更全面地分析筋土界面相互作用特性，改制了一台可视加筋土界面特性宏细观分析的试验仪器，可开展不同土工合成材料与填料的直剪和拉拔试验；该仪器改进了试验箱的尺寸，可方便两种试验的对比分析，增加了图像摄录系统，可进行试验过程的细观分析。使用新研制仪器分别进行了土工合成材料（土工格栅和土工布）加筋尾矿砂的直剪和拉拔试验，试验结果表明:两种试验条件下，土工格栅与尾矿的界面参数（似黏聚力和似摩擦角）及似摩擦系数均比土工布与尾矿的界面参数和似摩擦系数大；直剪试验下筋材网孔的有无对筋-尾矿界面参数均有较大影响，拉拔试验下筋材网孔有无对筋-尾矿界面参数似黏聚力的影响较为显著，对似摩擦角的影响较小。随着宏观变量法向应力的增加，细观参数孔隙率减小，平均接触数增加，反映在宏观上的现象就是填料颗粒被压密，筋材需要克服的阻力增大。该试验仪器能够较好地分析筋土界面宏细观特性，获得关键技术指标以用于加筋结构的设计。      

经济地理学制度理论的发展与建构的重要方向

在中国制度差异显著与目前区域发展不平衡不充分的现实下,经济地理学与制度相结合的研究显得尤为必要。通过系统地梳理经济地理学与制度的关系发现,经济地理学与制度在历史上存在先分离后融合的情况,并且目前经济地理学与制度研究结合态势不容乐观,制度研究在本体论、方法论、时间维度、空间尺度、研究方法等方面仍然存在不足。通过文献梳理与理论分析,认为经济地理学的制度理论应基于演化经济地理学进行建构,并提出了建构的方向：1）以系统论、层级观为指导,注重构建制度的层级结构;2）以反还原论为基础,寻求方法论的突破;3）借助演化的思想与路径依赖理论,强调时间在制度系统中的作用;4）加强对各空间尺度的制度研究;5）注重工具方法的借鉴与创新。     

尼日尔三角洲东部深水区构造特征及其形成机理

研究尼日尔三角洲东部深水区块发现，整个盆地从陆向洋具有3个大的构造分区：伸展拉张区、过渡区和挤压逆冲区。伸展区以大型同沉积断层伴生大量滚动背斜构造为特征，过渡区发育大量泥底辟构造，挤压区以复杂的逆冲叠瓦构造为主。通过分析形成机理，揭示东部深水转换带上M研究区构造特征，按构造的演化特征将该区构造分为泥底辟型、冲断-泥底辟混合型、逆冲型3种类型，提出研究区内的圈闭主要以构造-岩性圈闭为主，为尼日尔三角洲盆地深水勘探提供新的理论指导。     

Dynamic characteristics of marine soft clay under variable phase difference and initial static shear stress

Abstract

Under seismic loading, the soil layer is subjected to multidirectional cyclic shear stress with different amplitudes and frequencies because of the coupling of multiple shear waves and the soil element within a slope or behind a retaining wall is subjected to initial static shear stress before subjected to cyclic loading. Due to the complexity of seismic loading propagation, a phase difference exists between the initial static shear stress and cyclic shear stress. To investigate the influence of the phase difference and initial static shear stress on cyclic shear strain, cyclic modulus, and cyclic strength, a series of laboratory tests are performed on Wenzhou marine soft clay by multi-directional simple shear system, which can simulate the actual state better by controlling the horizontal cyclic stress in the x and y directions simultaneously. As the phase difference varies from 0° to 90°, the dynamic shear modulus increases and cyclic strain accumulation decreases with an increasing number of cycles. The shear strain increases with the initial shear stress.     

Orbital control on cyclical organic matter accumulation in Early Silurian Longmaxi Formation shales

High resolution(939 samples)total organic carbon content(TOC)analyses were conducted on the Shuanghe Section of^152.6 m in the Changning area,Sichuan Basin.The sampling section was divided into two units considering the distinct-different deposit environment and sediments accumulation rate.The lower part(Unit 1)and the peer part(Unit 2)with high resolution sample spacing(0.08–0.4 m)enables the identification of the precession cycle in two sedimentary sequences with distinct different sedimentary accumulation rate.MTM Power spectral analyses on untuned TOC series reveals significant peaks exceeding above the 95%confidence level and shows that both Unit 1 and Unit 2 have recorded Milankovitch cycles of 405 kyr long eccentricity,short eccentricity,obliquity and precession.The floating astronomical time scale(ATS)was constructed on the Shuanghe Section in the Early Silurian(~439.673–444.681 Ma),and which was calibrated by 405 kyr long eccentricity cycles.The total duration of the Wufeng and Longmaxi shales is 5.01 Myr.The floating ATS used for estimating the duration of the graptolite zones and each stage in the study interval.Finally,we postulated two models that could verify the linkage between orbital cycle and organic accumulation.To make sure whether productivity or preservation is the main factor that under long eccentricity control,the phase correlation between the obtained filtered signal and the theoretical orbital solution should be made clear in the further research.     

Progress in Danube Loess and Paleoenvironment Study

Danube loess, located at the westernmost part of the widespread Eurasian loess belt, is one of the most well-preserved aeolian dust deposits in Europe with the basal age dating back over 1 Ma. Owing to its unique location and formation processes, Danube loess plays an important role in understanding the linkage of climate changes in different climate regimes over Eurasian continent and paleoclimatic changes in middle-high northern latitudes. Major research advances of the Danube loess, including compositions, provenance, chronology, stratigraphy and paleoenvironment changes were systematically reviewed and the focuses of future research were suggested. To better understand loess provenance, the compositions of sediments in all the potential source areas should be investigated, and methodological study of provenance indicators and application of multi-proxies approaches need to be carried out. Chronologically and stratigraphically, feldspar luminescence dating and tephrochronology methods should be widely used, and the establishment of a uniform stratigraphic framework and correlation scheme should be constrained by precise chronology. In terms of the paleoenvironment, it is necessary to conduct high-resolution multi-proxies reconstruction of paleoenviroment for the entire loess-paleosol sequence, extending from the last interglacial period (130 ka to present) to interval of last 1 Ma. The future progress in Danube loess is crucial to improving the study of continental paleoclimate comparison and paleoclimate dynamics over the Eurasian loess region.     

基于Mapbox矢量切片在线配图平台的设计与实现

矢量切片是以四叉树模型切割矢量数据而生成的矢量要素描述性文件,Web GIS开发中,矢量切片的配图是通过编写Json样式文件,最后浏览器根据样式文件实现地图在线渲染显示,但这种方式配图效率低,样式单一。为了优化配图过程,本文从矢量切片数据和浏览器渲染两个方面提出了一套基于Mapbox的矢量切片在线配图平台,包括基于Geo Server的矢量切片服务发布、基于MapboxGL的浏览器地图渲染等,设计实现了矢量切片在线配图平台应用于浙江省电子地图配图与在线制图研究项目,简化了矢量切片地图的配图过程,具有很强的实用性。     

How soil texture,channel shape and cross-sectional area affect moisture dynamics and water loss in irrigation channels

To enhance the utilization efficiency of farmland irrigation water and reduce the leakage of water conveyance channels, the leakage process of channels was simulated dynamically. The simulated results were compared with data measured in laboratory experiments, and the performance of the model was evaluated. The results indicated that the simulated values of the model were consistent with the observation values, and the R² values varied between 0.91 and 0.99. In addition, based on the laboratory experiments, a water supply system (Mariotte bottles) and soil box were built using plexiglass. Three influencing factors, namely, the channel form, soil texture and channel cross-sectional area, were varied to observe and calculate the resulting cumulative infiltration amount, infiltration rate and wetting front migration distance. HYDRUS-3D software was used to solve the three-dimensional soil water movement equation under different initial conditions. The results demonstrated that the U-shaped channel was more effective than the trapezoidal channel in increasing the utilization efficiency of the water resources. A U-shaped channel with a small channel cross-sectional area should be adopted and the soil particle size should be prioritized in the construction of water conveyance channels for farmlands. The simulation results were in agreement with the observed results, which indicates that HYDRUS-3D is a reliable tool that can accurately simulate the soil moisture movement in water conveyance channels. The research results can provide a reference for the design and operation of farmland irrigation systems.     

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.